Universal Speedball Monitor Arm (3 Inch)
Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads. The "Chip Clip" clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned. 3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws. Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.
Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap.
Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20.
Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly. The extra force of the cam-lever design allows the arm to lock in place without the use of messy rubber pads.
The Chip Clip clamp design allows for easy, annoyance-free installation, and the ratcheting thumbscrew can be pulled out and repositioned.
3 inch arm has pass-through holes for 1/4-20 and 3/8-16 screws.
Universal Speedball components are compatible with any other brand of 1 inch (25mm) ball attachment like Ultralight Control Systems, Wooden Camera, etc.
Product Weight: 11.10oz (314g)Product Dimensions (WxLxH): 2.50 x 1.00 x 10.75in (63 x 25 x 273mm)
Universal Speedball Monitor Arm (9 Inch)
MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter
Universal Ultra Arm 3 Monitor Mount with Combo 1/4-20 & 3/8-16 Screw Knob
MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter
Universal Ultra Arm v2 (Combo 1/4-20 & 3/8-16) — Wooden Camera
MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter
MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter
is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension
Universal Speedball Monitor Arm (3 Inch)
MID49 Universal Speedball Monitor Arm (3 Inch) Review - Newsshooter
Universal Speedball Monitor Arm (3 Inch) is an articulating arm with combination 1/4-20 and 3/8-16 mounting screws on each end, two double-ball clamps, and one 3 inch (75mm) extension with velcro cable wrap. Each ball end contains both mounting thread standards. Push the 3/8-16 outer screw down to reveal the hidden 1/4-20. Install the ball with the cam-lever in the down position to finger-tight, then lift the lever to add extra locking force to the assembly.
Universal Speedball Monitor Arm (3 inch) by MID49
Ergounion Triple Monitor Mount - Adjustable 3 Monitor Desk Mount, Triple Monitor Stand for Screens up to 40 Inches Within 25 lbs, Monitor Arm for 3 Monitors with C-Clamp and Grommet
Universal Ultra Arm v2 (Combo 1/4-20 & 3/8-16) — Wooden Camera
Universal Speedball Monitor Mount
The triple monitor stand is used by professional-level gamers, industry-known videographers and filmmakers, digital entrepreneurs, and top employees at home or in the office. This mount features 360° rotary VESA plates with a built-in free tilt design. This means you can position your one, two, or three monitors flush together or spaced out and tilt them upward or downward to reduce strain on your neck.
Triple Monitor Mount with Gas Spring Arms - Black | Mount It!
Buy - MID49 M49-SPD-ARM-0 (M49SPDARM0) Universal Speedball Monitor Mount